The AT-800, Antenna Tester provides a cost-effective, fast, graphical way of determining the quality of mobile and base station antennas.
- Rugged, easy-to-use, hand-held design with extended battery life makes it idealfor use in the field
- Tests the system in VSWR, Return Loss, Match Efficiency, or Reflection Coefficient (Rho)
- Single frequency readings and frequency sweeps allow for everything from pin-point tests to system optimization and tuning
- Can save up to 12 traces for comparison and tracking over time
- RS232 Interface allows communication
Item Name
806-960 MHz, Antenna Tester
Frequency Range
806-960 MHz
Frequency Resolution
30 kHz
Frequency Accuracy
± 100 KHz
Measurements
Rho 0.000 to 1.000
Match Efficiency 0 to 100%
Return Loss -32 to 0 dB
VSWR 1.00 to 100.00
Measurement Accuracy Rho ± 0.04
Test Port
Connector TNC(F) (N, UHF, BNC male or female adapters available)
VSWR 1.25 max
Directivity 32 dB typical
Measurement Speed
Single Frequency Point 5 readings per second typical
Frequency Sweep 1 sweep per second typical
Field Strength
Range 0 to 100%, relative
Sensitivity 3M @ 12.6 ERP
PC Interface
RS-232 protocol via DB-9 port
Power Requirements
Power Supply Rechargeable NiCAD battery system. Unit may be re- charged while operating using a wall adapter (included)
Dimensions
8" x 4-5/8" x 1-3/4"
(204 x 118 x 42 mm)
Temperature
Operating 0 to 50°C (32 to 122 °F)
Storage -40 to +71 °C (-40 to +160 °F)
Humidity
95% ± 5% max (noncondensing)
Compliance
Unit complies with MIL-T-28800 Class 5 except for temperature and humidity. Unit is CE-compliant and RoHS compliant